Walldriller - 3.5mm Zinc Wall Anchors

The WallDriller® is designed to offer the maximum holding power in plasterboard. Its fine centered point helps guide the plug into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the plasterboard, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling plug without pre-drilling. Available in 3.5mm and 4mm, in both nylon and zinc.

      • Quick and easy to install
      • Self-drilling anchors, no pre-drilling required
      • Safe weight load - 52lbs
      • Includes screws and screw driver bit!
      • All you need is a screwdriver
      • Easy to remove and reinstall
      • Available in nylon or zinc
      • Two sizes available
      1. Using the screwdriver, push the top of the WallDriller™ into the drywall in a screwing motion.
      2. Turn clockwise until flush with surface and firmly in place. (Do not overtorque)
      3. Insert the screw in the object you need to affix and turn clockwise until firmly in place.